THE small HOUSE CATALOG

Plans, Drafting & Design

small house architecture

12 reasons I prefer small houses to tiny houses (on wheels)

Design PhilosophyTHE small HOUSE CATALOG119 Comments
Tiny house or small house? 

Tiny house or small house? 

Looking back on a decade of designing, building, living-in, renting-out & selling a variety of houses, I'm convinced a small house is a better option than a tiny one for just about everybody. Here are a few reasons why...

  1. Small houses are bigger without being big.

  2. Small houses can be extremely energy efficient without being tiny. 

  3. Small houses are not much more difficult to build than tiny ones.

  4. Small houses are not all that much more expensive to build than their tiny counterparts. (This is especially true if one is comparing a small house to a prefabricated tiny one).

  5. Small houses handle weather better.

  6. Small houses can be (confidently) insured.

  7. Small houses have longer potential lifespans, meaning they should last for generations.

  8. Small houses have better resale value than tiny houses. In fact, small houses typically have better profit margins and sell faster than both tinier and larger houses.

  9. Small houses appreciate in value while tiny ones depreciate like cars and RVs. This makes tiny houses poor long-term investments.

  10. Small houses are more practical and utilitarian with broader appeal.

  11. Small houses encourage people to stay in places - build communities - as opposed to just pass thru them (taking their houses with them).

  12. Small houses have room for [insert your hobby here].

If you think I'm alone in these sentiments - or that I'm just being cranky - I invite you to take a look at many of the alleged "founding members" of the tiny house movement. These pioneers, while still actively promoting tiny houses, giving paid lectures and TED Talks about them, even selling products, books and how-to courses on just how and why to build and live in them, no longer live - and often never lived at all - in tiny houses! I'll repeat that: they no longer live - and often never lived at all - in tiny houses... . 

According to a recent survey, those who actually have chosen to live in them are overwhelmingly unhappy with their decisions (original source here).

Serious food for though if you're considering moving into a tiny house.

I'm not saying tiny houses have no value at all, they have their place. But I think they have VERY limited applications, few are worth the costs, and that small houses are what will be the most satisfying living situation for most people.

However, if there's one thing tiny houses have done for the planet - and it's not create better housing -  it's that they have helped renew an interest in living in smaller spaces. Today more people than ever are building more viable, more intelligent, smaller scale housing - and that is a real, sustainable trend.

From my perspective, well designed, well built, super energy-efficient and affordable single and multi-family small houses are the future. 

What do you think? Join the conversation below!

10 simple ways to make a good little house even better

Design PhilosophyShawn A. Dehner14 Comments

Small houses are great. They can be comfortable, cost effective, energy efficient, highly valued, and attractive. However, many could be built much better simply by considering a few things before starting.

Here are 10 things to consider:

 

1. Build with Wood

Despite what many advertisers would have us think, wood is a sensible, natural, renewable resource. I've even had people email me criticizing the use of wood at all. A contrario! Wood is strong, manages high wind and earthquakes very well, is inexpensive, widely available, often locally harvested and milled, and has been successfully utilized by homeowners and professionals alike for building long-lasting, highly-efficient, attractive housing for centuries

Wood has less embodied energy than concrete, bricks, aerated blocks, steel, plastics (vinyl, e.g.) and most other construction materials. Wood can even be easily modified and recycled.

  • Wood is sustainable.
  • Wood is green.
  • Wood is strong.

So there.

2. Put your house on a slab. 

If soils permit, consider building your house on a super-insulated slab. Yes, yes, I know, I know, slabs have been seen as a crummy, poor man's foundation for years. No more! I'm not a Passive House certified designer but I can confidently tell you that some of the most energy-efficient houses in the world are being built on insulated slab foundations. Do some investigation.

3. Invest in good windows

People often tell me - with notable pride - about the used windows they intend to put in their houses. My advice is almost always, Don't do it!

But why not? It's reusable. Aren't you concerned about the environment? Yes I am and if you are too please take my advice

Ask yourself why those free windows were given away (i.e. thrown away) in the first place. I can probably answer that for you: they don't perform well and leak air. They're junk because they're old, likely not built well in the first place, or even worse, both.

Used windows will almost assuredly underperform even new, inexpensive, low end vinyl windows. Using recycled materials is a great idea, don't let my sarcasm discourage you from creative recycling. Just reuse good materials because using lame materials, recycled or not, is really a terrible idea.

If you need a third reason, used windows - no matter how cool they look - are unlikely to meet code anyway so the point is probably moot. 

4. Annie, get your caulk gun

Buy a case of quality, non-toxic, zero-VOC caulk and lay a bead along every seam in your house before you close up the walls. Caulk:

  1. the plates at the subfloor
  2. sister joists
  3. built-up posts
  4. adjacent studs
  5. around windows and doors. 

Caulk every narrow path to the exterior that I missed in that list.

5. Go tankless

An electric tankless water heater is one of the best ways to obtain hot water in a small house. Don't believe me? It's what they use in Europe, Japan, and other places where space is at a premium. I've used them in Maine and Washington and know they're inexpensive to run and work in cold climates.  

If you've got space - or live in a desert - also consider a solar powered heat-pump hot water heater. But an on-demand electric, propane or natural gas water heater is a wise choice.

6. Reduce thermal bridging in walls, floors & ceilings; or, Oh my God, what does that mean?!

An insulating material's resistance to conductive heat flow is measured and rated in terms of its thermal resistance or R-value - the higher the R-value, the greater the effectiveness of the insulation.

Here is an example of a code mandated R-value for a house:

  • Floors: R-30
  • Walls: R-21
  • Ceilings: R-49

In my region those minimums must be met in the cavities between the joists, studs and rafters of a house with some sort of insulation, typically fiberglass, spray-foam, rockwool, cellulose, et al. That's okay. But consider that wood has only an R-value of about 1.25 per inch, which means every stud, joist and rafter in your house has a VERY low resistance to heat migration. All that lumber is essentially a bridge for heat loss - or heat gain depending on the season. There are a lot of studs, headers, trimmers, rafters and joists in even a small house.

So what should we do?

I've written a little about the Scandinavian-style walls I build up here in the Pacific Northwest but you can also read more extensive experiences and wall design ideas from Lami Designs

For years we've focused on stopping air-leakage in North America and that is a great idea but we can do way better - and guess what, it's easy! In North America we're not doing nearly as much as we could to create energy-efficient housing. So, make your house better by air-sealing it and reducing conductive heat loss.

7. Super-insulate

This goes with point number six. Because insulating itself is such a widely advertised good thing to do it baffles me to see people - guilty builders included - often cutting costs in this department. Crappy insulation? It's ridiculous; it's dumb; don't buy it. Insulation is not a place to cut costs. In the scope of construction it's inexpensive! It even pays you back by reducing heating and cooling loads and adding comfort to your house. Why wouldn't you insulate properly? Ignore code too. Well, don't ignore it - improve upon it because it's not very impressive.

8. Avoid urea-formaldehyde glues and other toxic materials

The construction industry has an abysmal history of approving allegedly safe building materials only to outlaw them down the road after they've been shown to be hazardous. As a general practice, not a hard and fast rule, be suspect of engineered building materials, especially ones using urea-formaldehyde glues and binders. Here's a good example: don't build cabinets from interior grade plywoods that use this type of glue and reject engineered flooring that uses it as a binder (note: most interior sheet goods and bamboo floorings use urea-formaldehyde binders and Lumber Liquidators nearly went bankrupt by not regulating it properly).

Also choose low- or zero-VOC, non-toxic paints, stains and finishes for your house or project. And keep in mind many low-VOC products still contain carcinogenic components; non-toxic is also important.

9. Install a heat recovery ventilator

A HRV (heat recovery ventilator) removes stale moist air from inside a house via a simple inexpensive mechanical fan and vent system. An HRV goes one step further than a standard ventilation fan though; it brings in fresh air in an exchange. Air comes in to replace the air going out. And it gets even better: the warm outgoing air is used to warm up the colder incoming air thus reducing heat loss!

Surely, this sort of thing costs a fortune, right? Well, sure it does. But it doesn't have to.

After I got a $5,000 bid for materials from an admittedly good HRV manufacturer I decided it wasn't worth the cost and put together my own fantastic system using a Broan HRV and aluminum ducting sealed with UL 181B-FX foil tape. The system cost me around $800, took only two days to install, and works great.

Removing moisture and VOCs is an important leap forward in modern housing so I recommend some sort of air-exchange system. 

In warm climates a simple air-exchange system can be useful.

10. Build what makes sense

Build what makes sense and build it well. That's the smart thing to do. Let the alleged know it alls - who typically don't design or build anyway - calculate the virtues of their own square footage. Definitely don't build small for the sake of some arbitrary, made up notion of what small is. There's so much noise and baloney about what a small or tiny house should be that it's best to simply ignore the debate. Be modest and build a good house.

Afterword: There are so many ways for all of us to improve what we do and we can learn a great a deal from each other. However, I also recommend taking ideas like the tiny house movement or the small house movement - or any movement at all in fact - with a serious grain of salt. Movements have a terrible tendency to lose their way. Give up the idea of any one size fits all, perfect house design or building material. Be a part of the conversation and be open to new ideas. If we're successful we'll continue to innovate and make ourselves and our houses better still.